Decorative Window Film for Commercial Buildings

Our servicesDecorative film

Decorative window film puts frosted designs, patterns, logos and lettering on the glass you already have. We create custom designs, work from your logo or follow your designer’s direction, and install the film throughout the Chicago metropolitan area and Northern Illinois.

The assessment is free. We typically respond within one business day.

  • Commercial window film contractor since 1984
  • More than 80 decorative and privacy film installations at Advocate Sherman Hospital
  • A proof for your approval before any film is cut
  • Cut on our own plotter, installed by our own crews
A backlit glass wall covered in frosted film, with a design of clear geometric lines cut through it.
Clear geometric lines cut through frosted film on a glass wall: the design screens the space behind it and still lets the light through.

Decorative options

Designs, logos and patterns for existing glass

Decorative film goes on the glass already installed, without removing or replacing the glass, and it can be removed when a tenant changes or a brand is updated.

Office glass walls with a frosted band whose top edge is cut in the shape of the Chicago skyline.

Custom designs

Designs we create for the space, from a single door to graphics running the length of a hallway.

Clear lines in a design keep daylight and some of the view.

An office entrance with frosted sidelights and the Knead Construction logo in a frosted band across the glass doors.

Logos and lettering

Logos, lettering, room names and numbers, cut from frosted or colored film, or cut out of a frosted band so they read as clear glass.

Cut on our own plotter from your artwork. Shown: the Knead Construction entrance.

Glass partitions with a frosted band and a green accent stripe.

Bands, stripes and color

Frosted bands and stripes, with color accents where the brand calls for them, give glass walls a finished look and screen the view at eye level.

An office glass partition covered in a pattern of frosted squares, with the windows behind it partly visible.

Patterns and etched-glass finishes

Manufactured patterns and etched-glass looks, from a light etch to dense patterns, chosen from samples on your glass.

Open patterns screen part of the view; dense patterns and full frost hide more.

When a design needs full-color printing, we have the graphic printed by a specialty print vendor and our crews install it.

Hiding the view is the main goal? Frosted, gradient, one-way and blackout films, and what each one hides by day and after dark.

Hiding screens, not people? Casper cloaking film makes compatible screens look blank from outside the room, while people and the room stay visible.

Documented projects

Decorative film we have installed

Advocate Sherman Hospital kept bringing us back for more than 80 separate installations, from single doors to full hallways.

View down a hospital hallway, with a custom cut design repeated across each window to screen the view while keeping daylight.
The 2017 hallway: our custom design, cut in SOLYX Dusted Leaf patterned film and repeated across the windows.

Hospital · Elgin

Advocate Sherman Hospital

The hospital wanted its glass to look good, not just covered. We designed, cut and installed custom decorative and privacy film, with the treatment matched to each space rather than the same film everywhere.

  • 2017A custom graphic we designed for 24 hallway windows, approved by the hospital, then cut and installed in SOLYX Dusted Leaf patterned film
  • 2018A second hallway: 26 windows of frosted film with a custom design, 48 inches high
  • DoorsSOLYX Dusted Leaf on room doors and Cut Glass Crystal on a Cancer Center door and sidelight

Read the Advocate Sherman case study

Offices · 2023 to 2026

Office build-outs

Logos, lettering, frosted bands, gradients and room numbers in tenant build-outs.

Planning film for a build-out

  • One NorthClear frost stripes and lettering in 2024, and frosted phone booths with number cutouts plus lettering on phone booths, conference rooms and offices in 2026.
  • Prairieview Wealth PartnersFrost and logo on the front conference room, gradient film, and a logo on the reception door, 2025.
  • Beam LegalFrosted doors with a logo cutout and a custom design, 2026.
  • Miswak DentistryFrost, banding and graphics in 2023, and frost, a door logo and a gold logo in a new area in 2024.
  • Albrite BuildingDeep etch film on sidelights in Westmont, 2023, and a clear luster band in an Oak Brook conference room, 2023.

“The team at AAA Glass Tint came to frost the doors and windows of our office conference room. ... Even the intricacies of having our company logo etched out of the frost was meticulously executed.”

Jeanne Yoo

Google review

Planning decorative film for your space? Request a Commercial Assessment

How a project runs

From your idea to the finished glass

  1. 01

    Glass check and samples

    We inspect the glass first and identify it with a glass meter. Before we recommend any film, we check it against the manufacturer’s film-to-glass guidance. We do this for every film type, on every type of glass. Then samples go on your glass; for one Northern Illinois library, we put mockups of several films side by side on the library’s own glass.

  2. 02

    Design and proof

    We measure the glass, prepare the design and send a proof for your approval. Our design scope typically includes one revision, with the exact scope confirmed in the estimate.

  3. 03

    Cut or printed

    Logos, lettering and patterns are cut on our own plotter from frosted or colored film. Full-color graphics are printed by a specialty print vendor.

  4. 04

    Installed by our crews

    Film goes on clean, finished glass, after the glass is in and the major construction is done. We coordinate the timing with the general contractor or the tenant’s project manager. After-hours and weekend work is available at additional cost.

What affects the price. We price each project from the building, not from a rate sheet: the glass area and the number of panels, the film, the design work, whether graphics are cut or printed, access, removal of old film and scheduling. A minimum project charge applies, mainly to very small jobs such as a single door or a few panes. For a planned project, we can give a preliminary budget from the drawings and specifications. Within Illinois, distance from our Elgin headquarters does not change the price.

What window film costs

Want a price for your design? Request a Commercial Assessment

Fire ratings and warranties are product-specific. 3M lists all its FASARA decorative patterns as ASTM E84 Class A for interior use, and the SOLYX test report rates its polyester film Class A. Solar Gard’s test report for its ByDESIGN polyester decorative film, applied to glass, shows flame spread 0 and smoke developed 0, within the Class A range. Warranties differ by brand and by type, and printed and cut film can carry less coverage than plain film. Ask for the manufacturer’s data sheet, fire test information and warranty for the exact film in your design.

We do not subcontract installation; our own crews do the work. AAA Glass Tint is a commercial window film contractor serving commercial buildings throughout Northern Illinois since 1984. A family-owned company headquartered in Elgin, Illinois, with field crews based in Chicago, Northbrook, Wheaton and Orland Park.

For certificates of insurance and submittals, see how we work on commercial projects.

Film manufacturers

Authorized SOLYX dealer

Solar Gard authorized dealer for more than 20 years

Panorama authorized dealer

We also work with 3M films

Questions

Decorative film questions

Why choose decorative film instead of etched or sandblasted glass?

The main difference is that film can change and glass treatments cannot. Etched and sandblasted glass are permanent. Decorative film is applied to the glass already installed, without removing or replacing the glass, and can be removed later, which is useful in leased space and when a brand or floor plan changes.

Who approves decorative film in a build-out?

It is a mix, and it varies by project. The landlord or property manager may need to approve anything that goes on the glass. The designer or architect usually sets the look. The tenant signs off on its logo and the final design. Settle who has the final say before artwork is finished, because a change after film is cut means new film.

What happens to the film when the lease ends?

In our experience the film usually stays. Check the lease: if it requires the space to be returned to its original condition, plan for removal. Film can be removed, and how it is done matters: 3M’s FASARA data sheet calls for low heat or an adhesive remover, and notes that removing the film too quickly may leave excessive adhesive on the glass. We also change film when a space is reworked, as at one Oak Brook office suite where we removed a frosted band in 2024 and installed new film at a different height.

Request a free assessment

David Johnson, the owner, or one of our field technicians will look at the glass, bring samples and turn your design direction into a proof for approval. Helpful to have ready: the floor plan or drawings of the glass, your logo files and any landlord rules for glass. We typically respond within one business day.

×