PPG Exterior Solar Control Window Film, 2024

ProjectsSolar control filmPPG

Commercial facility · Northern Illinois

In 2024 AAA Glass Tint installed Solar Gard Sentinel Plus DX 5 on the outside of about 3,546 square feet of glass, 256 panels, in the offices, the café and a connecting hall of PPG’s Northern Illinois facility. Working from the exterior kept our crew out of the restricted interior, and PPG got the very high solar heat rejection it was after.

  • About 3,546 square feet of glass, 256 panels
  • Exterior film, installed from outside the building
  • Completed under the site’s OSHA and PPE requirements
  • Our own installation crews
Solar Gard Sentinel Plus DX 5 exterior window film on a brick commercial building, another AAA Glass Tint project using the same film installed at PPG, showing its mirrored daytime look.

The project

Exterior film, installed without entering the restricted interior

What PPG needed

PPG’s priority was very high solar heat rejection on large areas of double pane glass in its offices, café and connecting hall. Inside the building, access was heavily restricted and every worker had to follow strict OSHA safety rules and PPE requirements, which made a standard interior film installation difficult.

Why exterior film

In 2024 AAA Glass Tint installed Solar Gard Sentinel Plus DX 5 on the outside of about 3,546 square feet of glass, 256 panels. Working from the exterior kept our crew out of the restricted interior and let us work during normal business hours without disrupting the building. In our experience, an exterior film also does a better job of rejecting heat, because it stops the sun’s energy before it enters the glass.

The edges

Exterior film needs its edges protected from weather, so we edge sealed every panel with clear protective film strips.

We do not subcontract installation; our own crews do the work.

The result

PPG got the very high solar heat rejection it was after, and its team loved the daytime privacy the film added. With 60 percent of visible light reflected outside, the film’s mirrored exterior gives strong daytime privacy whenever it is brighter outside than inside. The work was completed from outside, during normal business hours, under the site’s OSHA and PPE requirements.

Photographs

Sentinel Plus DX 5 exterior window film on the ground-floor windows of a precast industrial building, another AAA Glass Tint project using the same film installed at PPG.

Project record

Project at a glance

  • Client: PPG, Northern Illinois facility
  • Year: 2024
  • Glass treated: About 3,546 square feet, 256 panels, in offices, the café and a connecting hall
  • Glass type: 1/4 inch plus 1/4 inch double pane clear insulated glass, no Low-E coating
  • Film: Solar Gard Sentinel Plus DX 5, applied to the outside of the glass
  • Edge seal: Clear protective film strips along the film edges
  • Site requirements: Strict OSHA safety rules and PPE requirements, with major restrictions on interior access
  • Schedule: Normal business hours, working from outside the building
  • Result: Very high solar heat rejection, and daytime privacy the PPG team loved

Published figures

Solar Gard’s published figures for Sentinel Plus DX 5 installed on the outside of 1/4 inch plus 1/4 inch double pane clear glass, the glass at PPG:

  • Total solar energy rejected: 91 percent
  • Solar heat gain coefficient: 0.09
  • Glare reduction: 95 percent
  • Visible light transmitted: 4 percent
  • Visible light reflected outside: 60 percent, which gives the glass its mirrored daytime look
  • Ultraviolet light blocked: more than 99 percent
  • Fade reduction: 94 percent, as rated by Solar Gard; actual fading depends on the materials and their sun exposure

For a similar project

How a heat and glare project starts

For an existing building, we evaluate the glass, the framing and the exposure on site. We check the proposed film against the manufacturer’s film-to-glass guidance and put samples on your glass when appearance matters. Crews work through the building in sections so it can normally stay occupied. After-hours and weekend work is available at additional cost. How a project runs, from the glass check to the walkthrough, is on our solar control film page.

Heat or glare through your glass? Request a Commercial Assessment

Questions

Questions about this project

Why install window film on the outside of the glass?

Exterior film stops the sun’s energy before it enters the glass, and the crew works outside the building, which helps when interior access is restricted. On this project, Solar Gard rates Sentinel Plus DX 5 at 91 percent total solar energy rejected on 1/4 inch plus 1/4 inch double pane clear glass, installed on the outside surface. We explain the ratings in our window film performance terms guide. For another project where limited interior access called for exterior film, see the AIT Logistics case study.

Can film go on double pane glass?

Often, yes, but the film, the glass and where the film goes all have to be checked against the manufacturer’s film-to-glass guidance. We explain how in Will Window Film Crack Your Glass?

Does mirrored film give privacy at night?

No. It gives privacy during the day, when it is brighter outside. At night, with the lights on inside, people outside can see in. See Does Privacy Window Film Work at Night?

How is exterior film protected from weather?

By sealing the edges. At PPG we edge sealed every panel with clear protective film strips.

Sources: AAA Glass Tint project records, 2024; Solar Gard, Sentinel Plus DX 5 data sheet, SK0314SPDX5 02/22. Figures are manufacturer ratings calculated with NFRC methodology for film on the outside surface of the glass named; results on other glass differ. Reviewed by David Johnson, owner of AAA Glass Tint. Last updated November 15, 2026.

More documented projects

Heat and glare film at other buildings

AIT Logistics Office Heat and Glare Window Film, 2024

Solar Gard Sentinel Plus DX 15 on the outside of the north glass and Panorama Slate 10 on the inside of the west glass, after a film mockup on the building’s glass.

Costco Glenview Heat and Glare Window Film, 2026

Panorama Slate 20 window film on about 500 square feet of glass at the entrance and the tire shop, installed before the store opened, to keep disruption to a minimum.

The service behind this project: Solar control film

All projects: Commercial window film case studies

Free assessment

Have a building like this one?

David Johnson, the owner, or one of our field technicians will visit your building to evaluate the glass and discuss your project. For a building still in design, we can start from the drawings and specifications. We typically respond within one business day.

Serving the Chicago metropolitan area and Northern Illinois, with select projects in Northwest Indiana, Southern Wisconsin and Southeast Michigan. See the areas we serve.

×