Government Agency 14 Mil Security Window Film, 2026

ProjectsSafety and security filmGovernment agency

Government facility · Northern Illinois

In 2026 AAA Glass Tint installed Solar Gard Armorcoat 14 mil clear security film on 136 panels at a government facility in Northern Illinois and attached every panel to its frame on all four sides with DOWSIL 995 structural silicone. Every crew member passed the agency’s background check and was badged, and the agency brought AAA Glass Tint back for additional areas.

  • 136 panels
  • About 2,500 square feet of glass
  • 14 mil clear security film
  • About 2,400 linear feet of structural silicone
Security window film on a government facility window in Northern Illinois, attached to the frame with a continuous bead of DOWSIL 995 structural silicone along the bottom and side edges.

The project

14 mil security film, attached on all four sides, under the agency’s site requirements

What the agency needed

The agency needed security film on glass at a government facility, installed by a contractor whose crews could meet its site security requirements. The project used a heavier film than the 8 mil we install most often, attached to the frame on all four sides.

The system

In 2026 AAA Glass Tint installed Solar Gard Armorcoat 14 mil clear security film on 136 panels, about 2,500 square feet of glass, and attached every panel to its frame on all four sides with DOWSIL 995 structural silicone. The film holds broken glass together, and the attachment keeps the filmed glass in the frame, so creating an opening takes more time and effort.

AAA Glass Tint is an Armorcoat Certified Partner, which allows us to sell and install Armorcoat security film thicker than 8 mil.

Site requirements

Before work began, every crew member passed the agency’s background check and was badged, and we provided certificates of insurance. In certain areas our crew worked with an escort. We do not subcontract installation; our own crews do the work.

The result

After the initial installation, the agency brought AAA Glass Tint back to install security film in additional areas. The glass now has 14 mil clear security film attached on all four sides of every panel, with the daylight and view through the glass essentially unchanged, and all of the work was completed under the agency’s badging, background check, escort and insurance requirements.

Photographs

Close-up of the DOWSIL 995 structural silicone bead joining security-filmed glass to the metal window frame at a government facility.
A similar government office building, shown for illustration. The building in this project is not pictured, for security reasons.

Project record

Project at a glance

  • Client: A government agency (not named for security reasons)
  • Location: Northern Illinois (building and glass locations not published for security reasons)
  • Year: 2026
  • Glass treated: About 2,500 square feet, 136 panels
  • Film: Solar Gard Armorcoat 14 mil clear security film
  • Attachment: DOWSIL 995 structural silicone on all four sides of every panel, about 2,400 linear feet
  • Site requirements: Badging, background checks, escorts in certain areas and certificates of insurance
  • Result: The agency brought AAA Glass Tint back for additional areas after the initial installation

Published figures

Solar Gard’s published figures for Armorcoat 14 mil clear:

  • Break strength: 420 pounds per inch, against 240 for 8 mil
  • Puncture strength: 230 pounds force, against 140 for 8 mil
  • Tear strength: 23.1 pounds force
  • DIN EN 356 classification: P2A, as reported by Solar Gard for the tested configuration
  • Visible light transmitted: 87 percent on 1/4 inch clear glass, so the glass keeps its daylight and view

For a similar project

How a security film project starts

For an existing building, we evaluate the glass, the framing and the exposure on site. We identify the glass in each opening before recommending a system. If a frame cannot support a proper attachment, we explain the limits plainly. We coordinate the installation around your building’s operating hours, tenants, access requirements and occupied areas. After-hours and weekend work is available at additional cost. How a project runs, from the glass check to the walkthrough, is on our safety and security film page. For the paperwork a public or managed building asks for, see Insurance, submittals, certified payroll and scheduling.

Security film for a public or secured building? Request a Commercial Assessment

Questions

Questions about this project

When is 14 mil security film used instead of 8 mil?

When the glass needs more resistance than our standard 8 mil system, often at government buildings and higher-risk openings. Solar Gard lists 14 mil at 420 pounds per inch break strength and 230 pounds force puncture strength, against 240 and 140 for 8 mil. We explain what film thickness changes in What Security Window Film Can and Cannot Do.

Does 14 mil film make glass bulletproof or unbreakable?

No. The glass still breaks. The film holds it together, and with a four-sided DOWSIL 995 attachment it stays in the frame longer. See Security Film Attachment Systems Explained.

Can AAA Glass Tint work in secured government buildings?

Yes. On this project our crews met the agency’s badging, background check, escort and insurance requirements, and the agency brought us back for additional areas. We cover the paperwork and coordination for property managers and contractors on our commercial projects page.

Who can install Armorcoat film thicker than 8 mil?

Armorcoat Certified Partners. AAA Glass Tint holds that status.

Sources: AAA Glass Tint project records, 2026; Solar Gard, Armorcoat at a Glance, SK0162AC 09/20, and Armorcoat 14 Mil Clear data sheet 09/20. Reviewed by David Johnson, owner of AAA Glass Tint. Last updated November 15, 2026.

More documented projects

Window film at other public buildings

School District Security Window Film, 9 Buildings, 2020 to 2025

Solar Gard Armorcoat 8 mil clear security film on 1,205 panels of exterior glass across nine buildings and the mobile classrooms of a Northern Illinois public school district, every panel attached to its frame with structural silicone.

City of Naperville Municipal Center Privacy Window Film, 2024

Frosted privacy film on 16 second-floor door and sidelight panels, and replacement film on two lobby panels in a separate 2024 project.

The service behind this project: Safety and security film

All projects: Commercial window film case studies

Free assessment

Have a building like this one?

David Johnson, the owner, or one of our field technicians will visit your building to evaluate the glass and discuss your project. For a building still in design, we can start from the drawings and specifications. We typically respond within one business day.

Serving the Chicago metropolitan area and Northern Illinois, with select projects in Northwest Indiana, Southern Wisconsin and Southeast Michigan. See the areas we serve.

×